Servers
Servers (Northbound Applications) refers to the communication between the NexusIM gateway and higher-level systems (like Cloud Platform, Data Center, SCADA, BMS…) for transmitting the collected data by many kinds industrial protocols.
Reporting Center
Reporting Server refers to the Reporting Center setting used when configuring rules in Devices and Rules. The configured number corresponds to a server setting. For example, a reporting center value of 1 sends data to Server 1; a value of 1-2-3 sends data to Servers 1, 2, and 3 in parallel.
Modbus Slave
The NexusIM gateway can act as a Modbus slave for a northbound Modbus master, such as a SCADA system. The master can read data collected from southbound devices through the Tags configured in Devices and Rules. Both Modbus TCP and Modbus RTU are supported.
OPCUA Servers
Configure the NexusIM gateway as an OPC UA server so northbound OPC UA clients can retrieve data collected through Devices and Rules.
BACnet Server
It is for configuring NexusIM gateway act as BACnet Server for Northbound BACnet client to fetch the data which gateway collected from south devices rules. It supports BACnet/IP or BACnet/MSTP communication protocols between BACnet server and client.
DNP3 Server
It is for configuring NexusIM gateway act as DNP3 Server for Northbound DNP3 client to fetch the data which gateway collected from south devices. The data was organized by “Tag Name” which configured in south device rule. It supports DNP3 TCP or DNP3 RTU communication protocol between server and client.